ST-00 · Overview00 / 05
The workshop
One room in Norway. Five stations, from the drawing to the finished part. Scroll or pick a station to walk through it.
Scroll to walk throughMove the mouse to look around
FDM printing · layer 212/480
Parts, prototypes and small castings.
Send a sketch, a photo or a broken part. It comes back as a drawing, then as a part you can use.
Walk the room00Overview01Design02FDM03Resin04Casting05Finish
Workshop open
Parts, prototypes and small castings.
Send a sketch, a photo or a broken part. It comes back as a drawing, then as a part you can use.
Walk the room- ST-01 · Design01 / 05
Design desk
Every part starts as a drawing. Send a sketch, a photo or a broken part and it comes back as CAD.
What I make with it
- →CAD from a sketch, photo or broken part
- →Design-for-manufacturing tweaks
- →Drawings with the tolerances that matter
- Tools
- [CAD]
- Formats
- STEP · STL
- Output
- Drawing
- ST-02 · FDM02 / 05
FDM printer
The workhorse. Strong, cheap parts in engineering plastics, printed layer by layer.
What I make with it
- →Functional prototypes, brackets and housings
- →Jigs, fixtures and enclosures
- →Small production runs
- Layer
- 0.1–0.3 mm
- ST-03 · Resin03 / 05
Resin printer
For the fine stuff. Light-cured resin gives sharp edges and smooth surfaces.
What I make with it
- →Small precise parts and fine detail
- →Masters and moulds with a smooth finish
- →Models that need to look finished
- Layer
- 0.05 mm
- ST-04 · Casting04 / 05
Casting bench
Printed patterns, mould preparation and metal casting.
What I make with it
- →Patterns and moulds for small metal parts
- ST-05 · Finish05 / 05
Finishing bench
Where a print becomes a part. Supports off, threads in, checked against the drawing.
What I make with it
- →Support removal, sanding and priming
- →Heat-set inserts, threads and assembly
- →Fit checks against the drawing
- Inserts
- M2–M6
- Finish
- Sand · prime
- Check
- Calipers
What I make
Design and CAD
Sketch, photo or broken part to CAD.
STEP · STL3D printing
Prototypes, jigs and small runs.
PETG · ASALarger than the bedResin detail
Fine detail, smooth surfaces.
0.05 mm layersLaser and CNC
Wood, leather, acrylic, PCB.
320 × 350 mmCasting
Patterns, moulds, small metal parts.
Vacuum castingFinishing
Inserts, sanding, priming, fit checks.
M2–M6 inserts
How it works
- 1
Send it
A sketch, a photo, a STEP file or the broken part.
- 2
Drawing and price
You approve both before anything is made.
- 3
Made
Printed, cut or cast, then checked against the drawing.
- 4
Yours
Collect it at the workshop, or have it sent by post.
Made here
Out of the room · 03 of 06 parts
Machines
Bambu Lab P1S Combo
FDM 3D printer
Build 256 × 256 × 256 mm
Material PLAPETGTPUABSASAPETPVASnapmaker 2.0 A350
3-in-1: FDM, laser, CNC
Build FDM 320 × 350 × 330 mm · laser 320 × 350 mm · CNC 320 × 350 × 275 mm
Material PLAPETGABSTPUWoodLeatherAcrylicPCBELEGOO Saturn 4 Ultra 16K
MSLA resin 3D printer
Build 211.68 × 118.37 × 220 mm
Material Photopolymer resinJH3-004 vacuum investment caster
Melting furnace and vacuum investment caster
Build Graphite crucible, 1250 °C · bell jar Ø130 × 210 mm
Material SilverGoldBrassCopperTooltos burnout furnace
Burnout oven
Build Chamber 150 × 150 × 200 mm · flask up to 3.5 × 7 in
Material InvestmentCasting waxCastable resinVEVOR 19 L vacuum chamber and pump
Vacuum chamber and pump
Build Chamber Ø278 × 300 mm, 18.9 L
Material InvestmentSiliconeResin
Get a quote
Tell me what you need. I answer by email, usually with a question or two.
Svein
Answers himself
Files or photos? Attach them when you reply to my email.